Thermostat XH-W3002, 230VAC/7A , -50°С/110°С

Programmable thermostat XH-W3002 designed for automatic switching on and off of the product when determining the temperature.

The controller has a digital indicator for the ambient temperature.
Three control buttons: "Menu", "Up" and "Down".
Thermosensor with 1 meter cable.
Output result LED.
The power supply is built-in. Input /red and black cable/ and output load /yellow and black cable/ voltage: 230VAC.
Two operating modes:
- Heating (start temperature is lower than stop temperature)
- Cooling (starting temperature is higher than stopping)

specifications:
- Power supply: 230VAC/50 Hz.
- Adjustment range: from -55 to +120 °C.
- Temperature adjustment accuracy: 0.1 °C.
- Temperature measurement accuracy: 0.2 °C.
- Closing time when switched on: from 0 to 10 minutes.
- Maximum communication current: 7A
- Maximum load power: 1300 W
- NTC10K waterproof probe with a length of 1m.
- Overall dimensions of the device: 60x45x31mm.

Programmable parameters:
P0 - switch-on temperature: from -50 to +110 °C
P1 - shutdown temperature: from -50 to +110 °C
P2 - setting of temperature values: from -10 to +10 °C
P3 - close when switched on: from 0 to 10 minutes.
- For operation, for example: with a refrigerator, the switch-on temperature (“P0”) is required to be higher than the switch-off temperature (“P1”).
- Relay delay on switching on (parameter “P3”) - it is mainly necessary when working with refrigerators to protect the compressor from overload (pressure equalization time).
- To return to factory settings (Reset), press two buttons: UP and DOWN for about 3-4 seconds.