Pellet burner and pellet boiler cotroller INT0173

Application:

The controller is designed to provide automatic control of combustion process and power regulation of pellet burners, boilers and fireplaces. It is possible to attach to the controller additional modules of the series “Expansion modules for pellet boilers” according to the heating system:
– Module for control of two heating circuits and DHW
– Module for control of buffer and DHW.

Convenient user interface via color touch screen.



The controller can control the following units from the pellet burner system:
– fuel supply auger 1
– fuel supply auger 2
– fresh air fan and flue gas fan
– electric heater to ignite the pellets
– cleaner to clean the ash
– circulation pump
– expansion modules for pellet boilers – lock menu against accidental access



Protection:
– protection against freezing of water
– protection against overheating of the boiler and “back fire”
– protection against blockage of the circulation pump



Technical data:
Power supply voltage: ~230V(+/- 10%)/50-60Hz
Lighter outlet: ~230V/2KW
Outlet circulating pump: ~230V/0.35KW
Outlets for fans: 2 pieces х ~230V/0.25kW
Output of augers: 2 pieces х ~230V/0.25kW
Output cleaner / tubus: ~230V/0.25KW
Sensor heating water: Pt1000 (form -50° up to +250°C)
Flue gas sensor: Pt1000 (from -50° up to +250°C)
Flame sensor: photoresistor
Room thermostat input: independent contact
Blocking thermostat input: independent contact
Flow / rev. sensor input: independent contact / Hall sensor
Display: color LCD with resolution 320 х 240 pixels
Measuring range temperature: from -50 up to +350 °С
Unit of measurement: 1°C
Humidity of the environment: 0 – 80%
Degree of protection: IP 00