Signal Converters

: (7) products
Image
Product code
Description
Datasheet
Manufacturer
Manufacturer code
Stock
Price
QTY
Converter 11010100, USB-RS232/RS485/UARTTTLImage of Converter 11010100, USB-RS232/RS485/UARTTTL

Converter 11010100, USB-RS232/RS485/UARTTTL


The device is a 3 in 1 universal converter. It can be used as RS232, RS485 or UART TTL converter. USB RS232 485 UART TTL is based on chip FT232RL, it has normal COM port made with two serial converters MAX232 and converter 485 made with chip MAX485. Connection parameters can be set on an operating system at speed: from 110 to 921600bps. It is applicable for communication with different microcontrollers such as PIC, Atmel and other with TTL serial connection. For connecting devices with RS232 or industrial RS485 interface through computer USB port. Specifications: Communication interface: RS232, RS485 and UART TTL Connecting RS232 via DB9 Male Connector Serial Speed: from 110 up to 921600bps Supply Voltage DC 5V (USB) LED indication for PWR supply voltage LED indication for RX, TX receiving and transmission PCB Size: 57 х 35mm Description: - socket X1 USB Cable Type A to a computer - socket X2 RS232 Female Cable - pin header X3 VCC – Output 5V DC TX – UART output RX – UART input GND – Ground 0V B – RS485 signal line B A – RS485 signal line A - pin header X4 Jumper for terminating resistor switch on 120Ω Signalling: - red LED D3 (PWR) – power supply is on - yellow LED D1 (RX) – turns on when receiving data - green LED D2 (TX) – turns on when sending data Setting a working mode (from MProg programme): - USB to RS232, UART C3 = “I/O” - USB to RS485 C3 = “TXDEN” Loading settings via Mprog: - Menu File>Open RS23 and UART – „USB to RS232 UART.ept“ RS485 – “USB to RS485.ept” Note: - Once settings’ loading is completed, the device needs to be plugged out of the computer USB port for about 5 seconds - Device’s factory default settings are: USB to RS232 and UART
Converter 11010100, USB-RS232/RS485/UARTTTL - pdf
701.27 KB
SIRIUS PCB
11010100
3
pc
1+ 42.20 BGN
3+ 39.90 BGN
5+ 38.00 BGN
10+ 36.30 BGN
view more
Converter 11010069, USB/RS485 Rev.1Image of Converter 11010069, USB/RS485 Rev.1
Converter 11010069, USB/RS485 Rev.1 - pdf
437.59 KB
SIRIUS PCB
11010069
5
pc
1+ 19.70 BGN
3+ 18.60 BGN
5+ 17.80 BGN
10+ 17.00 BGN
view more
Converter 11010070, USB/RS485 Rev.2Image of Converter 11010070, USB/RS485 Rev.2
Converter 11010070, USB/RS485 Rev.2 - pdf
1.01 MB
SIRIUS PCB
11010070
16
pc
1+ 19.70 BGN
3+ 18.60 BGN
5+ 17.80 BGN
10+ 17.00 BGN
view more
Converter 11010074, USB/RS485 Opto Rev.1Image of Converter 11010074, USB/RS485 Opto Rev.1

Converter 11010074, USB/RS485 Opto Rev.1


USB to RS485 Opto device is used for connection established between computer using USB port and devices with communication channel RS485. The system allows connecting several interface controllers to one commanding device. The device is based on CH340G and MAX485 chip. The RS485 interface used allows connecting up to 32 devices to one interface controller. Access controllers can be connected through FTP cable and the cable length must NOT exceed 1200 meters. Key Features: 2 or 3-Wire connection by RS485 Supply Voltage: 7÷24V DC Reverse-voltage protection USB and RS485 are galvanically isolated from one another Automatic data direction control Serial Speed: from 9600kbps up to 115200kbps LED indication for PWR supply voltage LED indication for RX, TX receiving and transmission PCB Size: 66mm х 21mm Supporting operating systems: Win XP, Win Vista, Win7, Win8, Win10, Linux,
Converter 11010074, USB/RS485 Opto Rev.1 - pdf
534.43 KB
SIRIUS PCB
11010074
0
pc
1+ 26.90 BGN
3+ 25.50 BGN
5+ 24.30 BGN
10+ 23.30 BGN
view more
Converter 11010075, USB/RS485 Opto Rev.2Image of Converter 11010075, USB/RS485 Opto Rev.2

Converter 11010075, USB/RS485 Opto Rev.2


USB to RS485 Opto device is used for connection established between computer using USB port and devices with communication channel RS485. The system allows connecting several interface controllers to one commanding device. The device is based on CH340G and MAX485 chip. The RS485 interface used allows connecting up to 32 devices to one interface controller. Access controllers can be connected through FTP cable and the cable length must NOT exceed 1200 meters. Key Features: 2 or 3-Wire connection by RS485 Supply Voltage: 7÷24V DC Reverse-voltage protection USB and RS485 are galvanically isolated from one another Automatic data direction control Serial Speed: from 9600kbps up to 115200kbps LED indication for PWR supply voltage LED indication for RX, TX receiving and transmission PCB Size: 66mm х 21mm Supporting operating systems: Win XP, Win Vista, Win7, Win8, Win10, Linux,
Converter 11010075, USB/RS485 Opto Rev.2 - pdf
512.02 KB
SIRIUS PCB
11010075
0
pc
1+ 26.90 BGN
3+ 25.50 BGN
5+ 24.30 BGN
10+ 23.30 BGN
view more
Converter USB 2.0 Type A to RS485 ZK-U485Image of Converter USB 2.0 Type A to RS485 ZK-U485

Converter USB 2.0 Type A to RS485 ZK-U485


The Type-A to RS485 converter ZK-U485 with 5V output is an electronic module that converts USB signals to RS485 level serial signals to realize the communication between computers and microcontroller platforms, industrial equipment, PLC,
Converter USB 2.0 Type A to RS485 ZK-U485 - pdf
1.11 MB
SIRIUS PCB
11020036
4
pc
1+ 25.70 BGN
3+ 24.20 BGN
5+ 23.00 BGN
10+ 21.90 BGN
view more
Converter USB 2.0 Type A to RS485Image of Converter USB 2.0 Type A to RS485

Converter USB 2.0 Type A to RS485


The USB 2.0 Type A to RS485 converter is designed to convert virtual COM port and RS485 interfaces. Allows you to connect any external devices with RS485 output to a personal computer with a USB port. The USB 2.0 Type A to RS485 Converter enables the connection to a PC of devices managed using the RS-485
Converter USB 2.0 Type A to RS485 - pdf
1.46 MB
SIRIUS PCB
11020038
4
pc
1+ 19.70 BGN
3+ 18.60 BGN
5+ 17.80 BGN
10+ 17.00 BGN
view more



0700 18 880